Oxford Alloy 82 is used for the welding of Inconel® alloys 600, 601, and 690, Incoloy® alloys 800 and 800HT, and Inco® alloy 330. This filler metal is also used for surfacing of steel. Weld metal deposited by Oxford Alloy 82 has high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures. Oxford Alloy 82 is used in dissimilar-welding such as joining Inconel® alloys, Incoloy® alloys, and Inco® alloy 330 to nickel, Monel® alloys, stainless steels, and carbon steels. This filler metal is also used to join stainless steels to nickel alloys and carbon steels
- 100% argon shielding gas for TIG (GTAW)
- 75% argon/25% helium or 100% argon shielding gas GMAW (MIG)
- 15 - 20 volt GTAW (TIG), 28 - 30 volt (SAW)
Oxford Alloys® 823/32X36 Nickel Bare Rod, Diameter: 3/32 Inch, Length: 36 Inch, Amperage: 120 - 175 amp GTAW (TIG), 275 - 350 amp (SAW), AWS Class: AWS 5.14: ERNiCr-3, Metallic Luster, Tensile Strength: 86000 psi, Yield Strength: 52000 psi, Elongation in 2" (%): 38%, Welding Process: TIG (GTAW)/MIG/SAW, Weld Metal Composition: 67.0% Nickel (Ni), 0.10% Carbon (C), 2.5 - 3.5% Manganese (Mn), 3.0% Iron (Fe), 0.015% Sulphur (S), 0.50% Silicon (Si), 18.0 - 22.0% Chromium (Cr), 0.75% Titanium (Ti), 0.03% Phosphorus (P), 2.0 - 3.0% Columbium (Cb) + Tantalum (Ta), 0.50% Copper (Cu), 0.50% OET, Applicable Materials: Inconel® Alloys 600, 601, 690, Incoloy® Alloys 800 And 800HT, Inco® Alloy 330
