Fabco Hornet gas-shielded flux-cored welding wire is designed for all-position applications and is usable with either 100% CO2 or a 75% argon/ 25% CO2 shielding gas mixture. It is recommended for single- and multi-pass applications
- Superior penetration profiles
- Easy slag removal and low spatter levels
- Good impact strength at low temperatures
- Low fume generation rate
- Promotes high-quality welds
- Reduces clean-up time, minimizes inclusions
- Resists cracking in severe applications
- Increases operator appeal, improves the working environment
- Fast freezing, ructile type, flux-cored wire slag system
- 35 - 50 cfh gas flow
- 23 - 29 volt
- 260 - 590 in./min. wire feed speed
- 4.4 - 12.3 lb/hr deposition rate
Hobart® Fabco® Hornet S246212-029 Flux-Cored Wire, Gas Shielded, Diameter: 3/64 Inch, Spool Diameter: 11-3/4 Inch Flange, Current Type: DC+, Amperage: 170 - 300 amp, Package: 33 lb Spool, AWS Class: AWS A5.20: E71T-1C H8, E71T-1M H8, E71T-9C H8, E71T-9M H8, AWS A5.20M: E491T-1C H8, E491T-1M H8, E491T-9C H8, E491T-9M H8, AWS D1.8, Tensile Strength: 86000 psi (100% CO2), Yield Strength: 81000 psi (100% CO2), Elongation in 2" (%): 29% (100% CO2), Charpy V-Notch: 93 ft.-lb. At -20 deg C (As Welded 100% CO2), Welding Process: FCAW (Flux Core), Weld Metal Composition: 0.030% Carbon (C), 1.29% Manganese (Mn), 0.30% Silicon (Si), 0.011% Sulphur (S), 0.008% Phosphorus (P), Applicable Materials: Non-Alloyed, Fine Grain Steel
