Designed to provide improved deposition rates, bead appearance and operator appeal over other electrodes of the same class when welding in low-temperature environments where low-temperature impacts are important. Excellent moisture resistance, good out-of-position welding capabilities and X-ray quality weld deposit
- Low moisture absorption rate
- Reduces worry of moisture pick-up and hydrogen cracking
- Easy slag removal
- Eliminates going back to oven for "fresh" electrodes
- Low spatter in all positions
- Reduces clean-up time
- Good wetting action
- Results in excellent weld bead appearance
- Reliable starts and restarts
- Enhances bead contour
- Very stable arc
- Provides better welds due to no porosity
- Easy to control
- 2.89 lb/hr 140 amp deposition rate, 73.1% 140 amp efficiency
- Flat, horizontal, vertical up, overhead welding positions
- Physical state: cored wire, form: coated rod, color: gray
- Increased toughness (impact strength)
- 26.5 volt
Hobart® Hobart® 718MC S115944-035 Welding Electrode, Diameter: 1/8 Inch, Current Type: AC/DC+, Amperage: 90 - 165 amp, Package: 50 lb Hermetically Sealed Can, AWS Class: AWS A5.1: E7018 H4R/E7018-1 H4R, Coating: Low Hydrogen Iron Powder, Tensile Strength: 80000 psi (As Welded), Yield Strength: 69000 psi (As Welded), Elongation in 2" (%): 28% (As Welded), Charpy V-Notch: 123 ft.-lb. At -20 deg F Temperature (As Welded), Reduction in Area: 68% (As Welded), Welding Process: SMAW (Stick), Weld Metal Composition: 0.04% Carbon (C), 0.92% Manganese (Mn), 0.25% Silicon (Si), 0.011% Phosphorus (P), 0.016% Sulfur (S), 0.07% Nickel (Ni), 0.06% Chromium (Cr), <0.01% Molybdenum (Mo), <0.01% Vanadium (V), 1.06% Manganese (Mn) + Nickel (Ni) + Chromium (Cr) + Molybdenum (Mo), Applicable Materials: Enameling Steel, Free-Machining Steels, Low Alloy Structural And Low, Medium Or High Carbon Steel
