Washington Alloy gasless wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy
- No shielding gas needed
- Single pass welding of thin gauge galvanized steel
- Excellent for outdoor use
- Smooth arc minimal spatter
- Works well in wind
- For the home workshop welder because it works so well on 110 volt machines and can be used on such thin gauge steel
Washington® 71TGS-035X2 Mild Steel Flux-Cored Wire, Self-Shielded, Gasless, Diameter: 0.035 Inch, Current Type: DC- (Straight Polarity), Amperage: 60 - 180 amp (Flat/Horizontal Fillet), 50 - 140 amp (Vertical), Package: 2 lb Spool, AWS Class: AWS A5.20: E71T-GS, Tensile Strength: 75000 psi (As Welded), Elongation in 2" (%): 22% (As Welded), Welding Process: FCAW (Flux Core), Weld Metal Composition: 0.16% Carbon (C), 0.82% Manganese (Mn), 0.31% Silicon (Si), 1.3% Aluminum (Al), 0.014% Phosphorus (P), 0.005% Sulphur (S), Applicable Materials: Galvanized, Carbon Steel, Thin Gauge Steel