Oxford Alloy ER80S-D2 is a low alloy steel wire with 2% manganese and 0.5% molybdenum as alloying elements. The weld deposits of this wire have moderately high strength with adequate low temperature toughness. A preheat and interpass temperature of not less than 300 deg F is required during welding
- 100% argon shielding gas for TIG (GTAW)
- 98% argon + 2% oxygen/75% argon + 25% Co2 shielding gas for MIG (GMAW) spray transfer
- 100% Co2/75% argon + 25% Co2 shielding gas for MIG (GMAW) short circuiting transfer
- 15 - 20 volt TIG (GTAW)
Oxford Alloys® 80S-D21/8X36 Chrome Moly Bare Rod, Diameter: 1/8 Inch, Length: 36 Inch, Amperage: 175 - 250 amp TIG (GTAW), AWS Class: AWS 5.28: ER80S-D2, Metallic Luster, Tensile Strength: 92800 psi, Yield Strength: 85550 psi, Elongation in 2" (%): 22%, Welding Process: TIG (GTAW)/MIG/SAW, Weld Metal Composition: 0.07 - 0.12 % Carbon (C), 1.60 - 2.10% Manganese (Mn), 0.50 - 0.80% Silicon (Si), 0.40 - 0.60% Molybdenum (Mo), 0.025% Phosphorus (P), 0.025% Sulphur (S), 0.50% Copper (Cu), 0.15 Nickel (Ni), 0.50% OET, Applicable Materials: Mild, Low Alloy Steel
