Oxford Alloy ER80S-Ni1 is used for welding low alloy high strength steels requiring good toughness at temperatures as low as -40 deg F (-40 deg C). The weld deposits of this filler metal are similar to Oxford Alloy E8018-C3 electrodes

• 100% argon shielding gas for TIG (GTAW)
• 98% argon + 2% oxygen/75% argon + 25% Co2 shielding gas for MIG (GMAW) spray transfer
• 100% Co2/75% argon + 25% Co2 shielding gas for MIG (GMAW) short circuiting transfer
• 15 - 20 volt TIG (GTAW)

Oxford Alloys® 80SNI11/8X36 Bare Rod, Diameter: 1/8 Inch, Length: 36 Inch, Amperage: 175 - 250 amp TIG (GTAW), AWS Class: AWS 5.28: ER80S-Ni1, Tensile Strength: 87000 psi, Yield Strength: 76850 psi, Elongation in 2" (%): 26%, Welding Process: TIG (GTAW)/MIG/SAW, Weld Metal Composition: 0.12% Carbon (C), 1.25% Manganese (Mn), 0.40 - 0.80% Silicon (Si), 0.025% Phosphorus (P), 0.025% Sulphur (S), 0.80 - 1.10% Nickel (Ni), 0.15% Chromium (Cr), 0.35% Molybdenum (Mo), 0.05% Vanadium (V), 0.35 Copper (Cu), 0.50% OET, Applicable Materials: Mild, Low Alloy Steel