Kobelco DW stainless series MIG wire is less voltage sensitive with less spattering and a higher deposition rate. It has good bead appearance and is easier to do multi-pass welding. CO2 gas is recommended so associated gas costs are lower
- Excellent performance in flat and horizontal position with either 75% argon - 25% Co2 gas mixture or 100% Co2
- Easy slag removal greatly reduces the cleaning time after welding
- Due to less spattering and small spatter size, adhesion of spatter to the base metal is almost eliminated
- Flux-cored wire consists of a tube of 18/8-material filled with a granular core of flux
- The flux contains both slag-forming compounds and alloying elements
- The composition of the flux is important for the welding properties obtained as well as the chemical composition and strength of the weld metal
- 24 - 33 volt
- 210 - 610 in./min. wire feed speed
- 5 - 12 lb/hr deposition rate
Kobelco Premiarc DW308L04528 Stainless Steel Flux-Cored Wire, Gas Shielded, Diameter: .045 Inch, Current Type: DC+, Amperage: 130 - 250 amp, Package: 28 lb Spool, AWS Class: AWS A5.22: E308LT0-1, AWS A5.22: E308LT0-4, Tensile Strength: 78898 psi (100% CO2), Yield Strength: 61132 psi 0.2% (100% CO2), Elongation in 2" (%): 42% (100% CO2), Reduction in Area: 0.47, Welding Process: FCAW (Flux Core), Weld Metal Composition: 0.02% Carbon (C), 1.29% Manganese (Mn), 0.44% Silicon (Si), 0.017% Phosphorus (P), 0.010% Sulphur (S), 9.88% Nickel (Ni), 19.16% Chromium (Cr), 0.014% Nitrogen (N), 9.2% FN, Applicable Materials: Low-Carbon 18/8-Steel Type AISI 304L, Stabilized Steel Type AISI 321 And 347 If The Working Temperature Is Lower Than 400 deg C
