• Alloy 5356 is an all position non - heat treatable MIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement, alloy 5356 is a very good all purpose wire, it is the most widely used of all aluminum fillers metals
• 350 - 475 in./min. wire feed speed
• 0.96 lb/cu. in. density
• 22 - 28 volt

Harris® 05356F1 Aluminum Welding Wire, Diameter: 0.035 Inch, Spool Diameter: 4 Inch, Current Type: DC (Reverse), Amperage: 110 - 220 amp, Package: 1 lb Spool, AWS Class: AWS A5.10, White Anodized, Tensile Strength: 39000 psi (As Welded), Yield Strength: 19000 psi (As Welded), Elongation in 2" (%): 17% (As Welded), Welding Process: MIG (GMAW And SAW), Weld Metal Composition: Balanced Aluminum (Al), 4.5-5.5% Magnesium (Mg), 0.05-0.2% Manganese (Mn), 0.25% Silicon (Si), 0.0008% Beryllium (Be), Each 0.05% Others, 0.15% Total, 0.06-0.2% Titanium (Ti), 0.1% Copper (Cu), 0.05-0.2% Chromium (Cr), 0.1% Zinc (Zn), 0.4% Iron (Fe), Melting Range: 635 deg C