Increase productivity with longer life front end consumables using Tweco® Spray Master MIG gun series with eliminator front end consumables. Combined with all the advantages of the Spray Master, this new line of mig guns helps the shop floor lower usage cost with improved operator appeal. Selecting the right nozzle for a welder's preferred "nozzle to tip relationship" on a mig gun is generally based on the application and the welder's daily welding routine

• Easy identification - part no rolled stamped on the outside surface of the brass stop
• 3-piece nozzle design - does not require an additional insulator
• Nozzle housing - cut and formed from 122 DHP copper alloy tubing
• Nozzle insert - machined from a solid brass allows and is crimped in place to allow the nozzle to thread onto the conductor tube
• Nozzle insulator - made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
• Recessed tips are generally used for higher heat applications where longer electrical stick-out is required or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
• Used in medium and heavy-duty welding application up to 600 amp
• For traditional style guns
• Gas metal arc welding process (air- cooled)
• 26I-75 Model

Tweco® Professional 1260-1130 MIG Gun Consumable, Nozzle, Style: Thread-On, 3/16 Inch Outer Diameter x 3.372 Inch Length, 1/8 - 5/32 Inch Recessed, Connection: M17 x 2-6H, 122 DHP Copper Alloy, Tip Size: 3/4 Inch, Amperage: 600 amp, Series: 26I Series, For Type/Brand/Model: 56S-SW, 56S-H Standard Gas Diffuser, No. 6 MIG Gun