Triple 7 is designed for the semi-automatic gas-shielded welding of carbon steel and some higher strength steels where requirements and conditions do not exceed its capabilities. It is intended for single–and multiplepass welding in all positions and has a fast-freezing slag that permits the welder to use higher current to deposit more metal faster and still produce a flat bead in all positions. The slag removes easily even from deep groove weldments and spatter is low, so a welder spends more time welding and less time cleaning up. The X-ray quality surpasses the radiographic specifications of AWS A5.20 and ASME SFA 5.20 when welded with the recommended procedures. Typical applications include shipbuilding, railcar fabrication, general plate fabrication, heavy gauge sheet metal, pressure vessels, and certain pipe weldments. shipbuilding, railcar, general plate fabrication Industries
- Excellent weldability with 100% CO2 or 75% Ar/25% CO2
- A fast-freezing slag permits the welder to use higher current to deposit more metal faster and still produce a flat bead in all positions
- Slag removes easily, even from deep groove weldments
- Spatter is low, so a welder spends more time welding and less time cleaning up
- 100% CO2, 75% Ar/25% CO2, 35 - 50 cfh shielding gas
- Intended for single and multiple pass applications in all positions
- Fiber spool uses standard spool hub-no special adapters required
- Durable: Fiber spool designed to withstand most kinds of everyday wear and tear
- Fiber spool is convenient, easy to change over
- Spool dimensions: 4 Inch width x 11-3/4 Inch flange diameter x 2-1/16 arbor x 6-1/2 Inch hub diameter
- Arc voltage: 29 volt at flat and horizontal, 25 volt at vertical up and overhead
- Wire feed speed: 353 in./min. at flat and horizontal, 175 in./min. at vertical up and overhead
- Deposition rate: 13.24 lb/hr at flat and horizontal, 6.75 lb/hr at vertical up and overhead
Tri-Mark® S285819-K29 Triple 7 Flux-Cored Wire, Gas Shielded, Diameter: 1/6 Inch, Spool Diameter: 11-3/4 Inch Flange, Current Type: DC+, Amperage: 350 amp (Flat And Horizontal), 225 amp (Vertical Up), 225 amp (Overhead), Package: 33 lb Spool, AWS Class: AWS: E71T-1C/-1M H8, Tensile Strength: 90000 psi at 100% CO2, 93000 psi at 75% Ar/25% CO2, Yield Strength: 79000 psi At 100% CO2 And 75% Ar/25% CO2, Elongation in 2" (%): 27% At 100% CO2, 26% At 75% Ar/25% CO2, Charpy V-Notch: 76 ft.-lb. At -18 deg C (100% CO2), 63 ft.-lb. At -18 deg C (75% Argon/25% CO2), Welding Process: FCAW (Flux Core), Weld Metal Composition: 0.03% Carbon (C), 1.27% Manganese (Mn), 0.56% Silicon (Si), 0.013% Phosphorus (P), 0.009% Sulphur (S) 100% CO2; 0.03% Carbon (C), 1.52% Manganese (Mn), 0.74% Silicon (Si), 0.013% Phosphorus (P), 0.009% Sulphur (S) 75% Ar/25% CO2, Applicable Materials: Carbon Steel, Higher Strength Steel