Pipeliner® 8P+ is the highest strength cellulosic electrode in the Lincoln Pipeliner® family and allows for increased fill capabilities resulting in fewer fill passes. It is recommended for root pass welding of up to X80 grade pipe, and hot, fill and cap pass welding of up to X70 grade pipe. For vertical down pipe welding – choose Pipeliner®8P+
- Deep penetration
- High productivity in vertical down and out-of-position pipe welding
- High productivity - true 5.0mm metric dia. yields 15 - 20% productivity gain over Shield-Arc® 70+
- Low temperature impact toughness - every lot tested to -20 deg F
- Hermetically sealed packaging - easy open cans - delivers quality product, performance, reliability and consistent results
- Lot control and Q2 testing – manufactured to lot control standards and tested per AWS A5.1, Class C3 Schedule I
- Clean, visible weld puddle
- Superior puddle control
Lincoln® Pipeliner® 8P+ ED030828 Covered Electrode, Diameter: 3/16 Inch, Length: 14 Inch, Current Type: DC+, Amperage: 130 - 210 amp, Package: 50 lb Easy Open Can, AWS Class: AWS A5.5/A5.5M: 2006 E8010-P1, E8010-G, Coating: Cellulose Sodium, Tensile Strength: 81 - 97 ksi (As Welded), Yield Strength: 69 - 79 ksi (As Welded), Elongation in 2" (%): 19 - 32% (As Welded), Charpy V-Notch: 36 - 110 ft.-lb. At -20 deg F Temperature (As Welded), Welding Process: SMAW (Stick), Weld Metal Composition: 0.09-0.20% Carbon (C), 0.55-0.98% Manganese (Mn), 0.07-0.27% Silicon (Si), 0.01-0.02% Phosphorus (P), 0.01-0.02% Sulfur (S), 0.73-1.00% Nickel (Ni), 0.02-0.05% Chromium (Cr), 0.13-0.22% Molybdenum (Mo), 0.01 max% Vanadium (V)
