Innershield® NR-211-MP is a versatile wire suitable for all-position welding of light gauge or thin plate. It is recommended for maximum plate thicknesses in the range of 7.9 mm (5/16 Inch) to 12.7 mm (1/2 Inch). For an easy to use general fabrication wire - choose Innershield® NR-211-MP

• Versatile welding capability on a variety of base materials
• High operator appeal and good bead appearance
• Easy slag removal
• Fast freezing characteristics accommodate poor fit-up
• All welding position except 3/32 Inch diameter
• 5/16 Inch maximum plate thickness for 0.045 Inch and smaller diameters
• 1/2 Inch maximum plate thickness for 0.068 - 3/32 Inch diameter
• 89 - 92 rockwell brinell hardness
• 1.6 - 5.1 kg/hr melt-off rate
• 83 - 89% efficiency
• 1.3 - 4.1 m/min wire feed speed
• 16 - 23 volt
• 1.3 - 4.5 kg/hr deposition rate

Lincoln® Innershield®NR®-211-MP ED012508 Mild Steel Flux-Cored Wire, Self-Shielded, Diameter: 5/64 Inch, Current Type: DC-, Amperage: 180 - 325 amp, Package: 14 lb Coil, AWS Class: AWS A5.20/A5.20M: 2005 - E71T-11, Tensile Strength: 88 - 94 ksi, Yield Strength: 63 - 69 ksi, Elongation in 2" (%): 22 - 25%, Welding Process: FCAW (Flux Core), Weld Metal Composition: 0.23 - 0.26% Carbon (C), 0.57 - 0.66% Manganese (Mn), 0.17 - 0.26% Silicon (Si), <=0.01% Sulphur (S), <=0.01% Phosphorus (P), 1.3 - 1.6% Aluminum (Al), Applicable Materials: Sheet Or Thin Gauge Metal, Galvanized Sheet Metal, Galvanized Or Zinc Coated Carbon Steel