Dual Shield II 80-Ni1H4 produces diffusible hydrogen levels of less than 4 mL/100 g over a wide range of welding parameters

• 75% argon/25% Co2 shielding gas
• Dual Shield 80 Ni1 is an all-position wire which exhibits a smooth, easily controlled arc that produces a spray-like transfer
• The slag firmly holds the molten puddle for out-of-position work and is easily removed
• The alloying elements in the core are finely tuned to provide excellent low temperature impact toughness both as welded and stress relieved
• 28 - 33 volt
• 200 - 500 in./min. wire feed speed
• 4.2 - 10.7 lb/hr deposition rate
• 86 - 87% efficiency

ESAB Dual Shield II 80-NI1H4 245011119 Low Alloy Flux-Cored Wire, Gas Shielded, Diameter: 3/64 Inch, Amperage: 150 - 290 amp, Package: 33 lb Plastic Spool, AWS Class: AWS A5.29: E81T1-Ni1MJDH4, Tensile Strength: 89 ksi (As Welded), Yield Strength: 79 ksi (As Welded), Elongation in 2" (%): 28% (As Welded), Charpy V-Notch: 100 ft.-lb. At -29 deg C Testing Temperature (As Welded), Reduction in Area: 71% (As Welded), Welding Process: FCAW (Flux Core), Weld Metal Composition: 0.05% Carbon (C), 1.20% Manganese (Mn), 0.32% Silicon (Si), 0.014% Phosphorus (P), 0.09% Sulphur (S), 0.93% Nickel (Ni), Melting Range: >1000 deg C